Download

/Download
Download 2018-11-08T16:29:57+00:00

Onze verontschuldigingen, dit bericht is alleen beschikbaar in Amerikaans Engels, Europees Spaans, Duits en Frans. Voor het gemak van de kijker, is de inhoud hieronder weergegeven in de standaard taal van deze site. Je kunt op een van de koppelingen klikken om de taal van de site naar een andere beschikbare taal te veranderen.

Here, download the latest updates for your leGPSBip+ and leGPSBip.

Firmwares and voice packs have been developped to be compatible with both leGPSBip+ and leGPSBip.

How to update my instrument, step by step :

leGPSBip+

  • Download firmware

  • Connect your leGPSBip+ as a disk to your computer

  • Place the firmware file at the root of leGPSBip+

  • Keep your leGPSBip+ connected until it stops blinking, and then click on Eject disk

  • Still USB connected, switch your leGPSBip+ on, and wait for the vocal confirmation 'updating, please wait'

  • Wait until the steady green LED for 5sec then the ascending start-up tone.

  • The update is complete !

leGPSBip

  • Download voice pack and firmware

  • Connect your leGPSBip as a disk to your computer

  • Delete the file named config.gpsbip located at the root of leGPSBip

  • Place the voice pack file into the folder named 'voices' on your leGPSBip

  • Place the firmware file at the root of leGPSBip

  • Keep your leGPSBip connected until it stops blinking, and then click on Eject disk

  • Still USB connected, switch your leGPSBip on, and wait for the vocal confirmation 'updating, please wait'

  • Disconnect leGPSBip, and select language

  • In order to get the Instant Vario, proceed to the sensors calibration

    You need to follow the vocal informations and the procedure described here.

  • Once you have done the calibration, the update is complete !

Firmware & Configurator

version number: 3.10 (2018-11-08)

NOTE : The vario is silent on ground by default : you need to takeoff to enable the vario. (alternatively, changing volume will un-mute the vario)

Don't miss the next update

Simply fill your email here, and we will keep you updated !

Need help ?

It means you have to proceed to the sensors calibration in order to get the Instant Vario.

Please, follow the procedure described here.

The vario is silent on ground by default : you need to takeoff to enable the vario. (alternatively, changing volume will un-mute the vario)

  1. Download file
  2. Connect your leGPSBip as a disk (see section “file transfer and charge” on the manual) to your computer
  3. Place the file at the root of the disk
  4. Keep your leGPSBip connected until it stops blinking, and then click on Eject disk
  5. Still USB connected, switch your leGPSBip on, and wait for the vocal confirmation “updating, please wait”
  6. Wait until the steady green LED for 5sec then the ascending start-up tone.
  7. The update is complete !
  8. Only for the BETA : disconnect leGPSBip, then hold the button pressed for 20s.
  1. Download file
  2. Connect your leGPSBip as a disk (see section “file transfer and charge” on the manual) to your computer
  3. Replace the old file by the new downloaded one inside the folder named “voices”
  4. Keep your leGPSBip connected until it stops blinking, and then click on Eject disk
  5. Disconnect and switch it on
  1. Switch off your leGPSBip
  2. Connect it to your computer
  3. Open leGPSBip Configurator
  4. Click on “load config”, and follow the instructions
  5. The version number will be available under System > more (see screenshot below)

Screenshot_firmware_version_number

Version 3.10 (2018-11-08)

  • Vario tone : tone generation, contiunous tone and sink alarm
  • Configurator : improvement : various options
  • Configuration file : “Updating, please wait” at the first 2 startups
  • Config file : fix firmware/lang pack version update if present
  • Language selection : fix : at startup only when needed

Version 3.09 (2018-09-18)

  • Vario : instant vario with accelerometer and gyroscope sensors
  • User calibration mode
  • Battery level : speaks 0%
  • Factory default : hold button menu

Version 2.2 (2017-04-24)

  • option for compatibility with Kobo in the Configurator
  • pre-shutdown confirmation tone to prevent inadvertate power off
  • backup config file after a reset is now called before-reset-config.gpsbip instead save_config.gpsbip
  • sink alarm vario glitch fixed
  • new install file format includes the latestet version of Configurator
  • large GPS tracking perdiod (> 10sec) behaviour improved
  • vario silent reactivated when low battery reached bug fixed
  • USB power off when charged and not used
  • KML: G force max
  • KML: flight summary cleanup
  • KML line witdh 3 instead of 2
  • IGC file error if KML disabled
  • Solar charge status and battery level at startup

Version 2.0.5 (2016-12-01)

  • FAI/CIVL IGC valid with XSD signature
  • Timezone in minute for India and other specific timezone
  • Vario sweep tone glitch
  • Vario filter init startup
  • Barometric altitude GPS correction even before takeoff
  • Config file detection improved
  • Autoshutdown fixed
  • GPS reception in high performances when USB powered
  • Takeoff detection
  • Sink alarm setting and issue
  • Kobo Glow compatibility
  • Track folder YYYY/MM/DD
  • KML file: altitude jump, track with pilot name, position rounding
  • IGC file: barometric altitude sign
  • Mac OS X: eject device without remount
  • Vario: integration time: slow and fast available
  • Altitude barometric with NOAA
  • Double tap detection patern
  • Auto voice mode toggle (triple click) fix
  • Sink alarm disable regression fix

Version 1.0.7 (2016-07-25)

  • GNSS position issue in Q3/Q4
  • LK8EX1 protocol temperature added
  • Fix barometric altitude around sea level
  • Export voice.pack number
  • Kobo automatic reconnection
  • IGC flight date legacy compatibillity
  • Double tap sensitivity decrease
  • Vario volume medium at lower volume
  • Voice tap can be disable until take off
  • Voice tap available with double click if vario disabled
  • GPS negative altitude issue, not supported in IGC file format
  • LK8EX1 vario sign issue
  • UTC offset
  • Vario silent on ground
  • Vario glitch when silent
  • Firmware version recorded in IGC and KML file
  • Led green fix at power up
  • KML track in 3D or 2D mode
  • Voice manual: double click when vario silent
  • Speak on config file change
  • Timezone setting in configurator
  • Timezone in IGC and KML files
  • Configurator import compatibility
  • Kobo/External battery detection
  • Configurator installation from .install updates
  • Voice pack (1) (2) rename
  • Vario tone glitch after updates
  • GPS wait for 3D fix before low power mode
  • Shutdown when battery low
  • Dont startup when battery low
  • LK8EX1/GPSBip protocol Vz value fix

Version 1.0.0 – 11-05-2016

  • First firmware version.

In case of difficulty, you can enter in recovery mode with the following procedure:

  1. Connect your leGPSBip via USB to your computer
  2. Hold the button pressed for 30s
  3. Download this file
  4. Place the file at the root of the disk
  5. Keep your leGPSBip connected until it stops blinking, and then click on Eject disk
  6. Still USB connected, switch your leGPSBip on, and wait for the steady green LED for 5sec then the ascending start-up tone.
  7.  You can now install the latest update